RockCloud-基石云安全-官方博客
CN2 GIA vs CN2 GT: Routing, Peak-Hour Performance, and Selection Criteria
CN2 GT only uses CN2 for the outbound segment, while CN2 GIA uses CN2 from provincial nodes along the entire route. This article explains the differences in routing, peak-hour stability, three-network return paths, and cost, shows how to identify lines with traceroute/MTR, and gives selection advice based on business scenarios.
How to Choose a US CN2 Server? Determining Return Routing and Peak-Hour Packet Loss
The key to choosing a US CN2 server is verifying that the return path uses 59.43 nodes end-to-end. This article explains MTR tracing, latency floor calibration, and business scenarios to avoid GT disguising as GIA and distinguish link acceleration from DDoS protection.
CN2 GIA vs CN2 GT Performance and Latency: A 4-Step Practical Test
CN2 GIA vs CN2 GT: The key difference is in return routing. Use bidirectional mtr and peak-hour testing to distinguish them in 4 steps.
BGP High-Protection vs Single-Line High-Protection: Differences and Selection Guide for Enterprise Quotation Comparison
Understand the key differences between BGP and single-line DDoS protection, focusing on routing control and mitigation authority, with a practical comparison table and selection checklist.
